GET A QUOTE

Fire Alarm System (EN54)

Manual Call Point

A9060T

Product features

LPCB and CPR approval.

Semi-flush or surface mount.

Lever reusable (non-glass break).

LED indicator.


Read more detail

The A9060T manual call point(hereinafter referred to A9060T) is mainly designed to be used with an intelligent two-bus control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the coded address and the equipment status of the manual fire call points. When the manual fire call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The A9060T supports electronic coding, which is more suitable for engineering application convenience.

Technical Parameters:
Executive StandardEN54-11
Protection classIP43
Operating voltage24V (pulse modulation)
Operating Currentmonitoring status<300uA, alarm status <2mA
ApplicationIndoors
Operating temperature-10 ℃ ~ 55 ℃,Relative humidity:≤ 95%(non-condensing)
IndicatorRed alarm indicator flashes when data logging, and it will keep on when pressing the manual button
CodingIt supports soft addressing via coder in situ. Address codes 1 to 324 are available for selection
Material and colorABS, red
WiringNon-polarity two-wire bus system (L1, L2)
Dimension(Surface-mount)90mm×90mm×42mm; (Semi-flush mount):90mm×90mm×23mm
Weightabout;85g


9060T.jpg

If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.


Headquarter in Shenzhen


Tel: +86 755 2690 9106


Fax: 86 755 8622 6969


E-mail: sales@fhsjdz.com


Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China

Copyright ©SHENZHEN FANHAI SANJIANG ELECTRONICS CO., LTD. | Legal notice