GET A QUOTE

Fire Alarm System (EN54)

I/O module

A9056T

Product features

LPCB approval.

Semi-flush or surface mount.

Lever reusable (non-glass break).

LED indicator.

Full soft addressing, and rewriting through CODER-9001 encoder in site.

Read more detail
  • The A9056T I/O module (A9056T for short) is used with SEC3002 fire alarm control panel. It is mainly used to realize an output control for fire linkage equipment (such as smoke dampers, blow valves and fire dampers) and receive the feedback signals of the fire linkage equipment so that a judgment on whether or not the fire linkage equipment is operating normally can be done.

Technical Parameters:
Executive standardEN54-18
Operation voltageloop DC24V (non-polarity);power DC24V(non-polarity)
Static currentloop current<0.8mA; power current<2mA
Action currentloop current<5mA; power current<15mA
Capacity of the output control contact<2A@DC30V
Operating indicatorThe inspecting indicator blinks once about every 12 seconds in the inspection status or remain lit in the output status; the input indicator will remain lit in the feedback status
Operating environmentIndoors, Temperature: -10℃ ~ 55℃; RH: ≤95% (40 ℃±2℃, non condensing)
Dimension86×86×41(mm, With base)
Weightabout 148g(With base)


9056T.jpg

If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.


Headquarter in Shenzhen


Tel: +86 755 2690 9106


Fax: 86 755 8622 6969


E-mail: sales@fhsjdz.com


Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China

Copyright ©SHENZHEN FANHAI SANJIANG ELECTRONICS CO., LTD. | Legal notice