I/O Module
A9058T
Product features
Non-polar wiring with loop power.
Soft address with a CODER(address range: 1~324).
With three input monitoring modes.
Comply with CE standard.
Read more detail
Non-polar wiring with loop power.
Soft address with a CODER(address range: 1~324).
With three input monitoring modes.
Comply with CE standard.
Read more detail
A9058T Addressable I/O module (A9058T for short) can be used with a loop-type fire alarm control panel. Powered by a non-polar by using 2-bus, it’s designed with low power consumption, no need for external 24V supply. The A9058T should be installed on the DZ-9058 base.
| Standard | EN 54-18 |
| Operation voltage | loop DC20~28V (non-polar wiring) |
| Quiescent current | ≤1.2mA |
| Activated current | ≤4mA |
| Relay Contact (Resistive Load) | Rated at 2A, 30VDC(Max) |
| Output mode | volt-free relay, dry contact without monitored |
| Input monitoring mode Mode 1 | Normally open input Mode 2: Normally closed input Mode 3: Equipment fire alarm and fault input |
| End-of-line resistor | 47kΩ |
| Trigger resistor | 15kΩ |
| Address method | soft address with a CODER(address range: 1~324) |
| Loop | non-polar 2-wire loop |
| Operating environment | Temperature: -10 °C ~ 55 °C; Relative humidity: ≤ 95% (40 °C ± 2 °C, without condensation) |
| Weight | about 132g (with base) |
| External dimension | 86×86×41mm (with base) |
If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.
Headquarter in Shenzhen
Tel: +86 755 2690 9106
Fax: 86 755 8622 6969
E-mail: sales@sz-sanjiang.com
Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China
Tips