GET A QUOTE

Fire Alarm System

Sounder visual indicator

SG-991E

Product features

Built-in standalone CPU, quick calculating speed and excellent stability.

Non-polarity two-wire bus to make cabling easy, and avoid wrong wiring.

Sounder/ visual indicator setting freely according to different environment. 

Read more detail
CCCF.png
  • The SG-991E fire alarm horn/strobe (horn/strobe for short) is a kind of product manufactured by our company to be used with bus-type fire alarm control units. Controlled by a microprocessor, the horn/strobe can realize real-time communication with a bus-type fire alarm control unit and receive the control commands sent by it. When in a routing inspection, the red status indicator will blink; after an accident happens, the horn/strobe will start to operate after receiving a startup command from the bus-type fire alarm control unit. The red status indicator will remain lit and the horn/strobe will give a flashing signal and an audible alarm signal to notify the people on the scene of the accident that a fire has occurred on the site and of the necessity to take related evacuation measures, thus preventing the fire accident from becoming a major one. The horn/strobe may be restored to the monitoring status after the MUTE or RESET key on the bus-type fire alarm control unit is pressed.


  • The horn/strobe may be used to give audible alarms and flashing alarms on the scenes of accidents. It is suitable for places like high-rise residential buildings, public places, hotels, amusement buildings, factories, shopping centers, hospitals, schools, office buildings and stock exchanges, particularly places with low visibility or the possibility of generation of smoke.

Technical Parameters:
Operating voltageBus, DC24V± 20%
Operating currentMonitoring current:<1mA; alarm current: <120mA@DC24V
Operating environmentIndoors. Temperature: -10℃~+55℃; relative humidity: ≤95% (40℃±2℃, without condensation)
Operating IndicatorBlinks when polling, and keeps on when alarming
Blinking rateOnce/second
Alarm volume>85dB ( Dead ahead 3 meters)
CodingAddressable
MountingWall-mount/ flushing-mount 1.8 meters from the ground
Wiring methodFour-wire system, non-polarity two signal buses (L1, L2) and power lines (+24V, GND)
Dimension
84 x 142 x 66.4mm
CertificationCCC (GA385- 2002)


If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.


Headquarter in Shenzhen


Tel: +86 755 2690 9106


Fax: 86 755 8622 6969


E-mail: sales@fhsjdz.com


Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China

Copyright ©SHENZHEN HTI SANJIANG ELECTRONICS CO., LTD. | Legal notice