Built-in standalone CPU, quick calculating speed.
Connect 9100 series controller by RS-485 bus, and each control panel can be with 99 units of fire display panels and KR-485 expansion cases, and each KR-485 expansion case can be with up to 50 fire display panel.
It can give sound and light alarm signal, and support fault detecting and then warning by itself.
Read more detail
The JB-FSD-982E fire indicating panel (indicating panel for short) is a kind of micro processor controlled fire indicating panel developed by our company. Each indicating panel is connected to a fire alarm control panel produced by our company via a special RS-485 interface to process and display the data sent from the fire alarm control panel. Each floor of a building may have an indicating panel installed. When there is a fire alarm on the floor where the indicating panel is installed, or the neighboring floor above or below it, the indicating panel will give a horn/strobe alarm and display the floor No., the room No., and some other position information about the fire alarm.
| Operating environment | indoors, temperature -10℃~+50℃, and the relative humidity ≤95%(40℃±2℃ without condensation) |
| Operating voltage | bus24V，DC24V±20% |
| Mounting positions | Wall-mount 1.3~1.5m from the ground |
| Contact capacity | passive: Normal open/Normal close, active:1.25A@DC 30V |
| Dimension | 160x120x45(mm) |
| Certifications | CCC |
If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.
Headquarter in Shenzhen
Tel: +86 755 2690 9106
Fax: 86 755 8622 6969
E-mail: sales@fhsjdz.com
Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China
Tips