GET A QUOTE

Conventional

Emergency Hold/Abort Unit

QM-AN-01E

Product features

To be installed outside exit of gas extinguishing conservation area, and high brightness LED displays working status.

QM-AN-01 Emergency hold/abort unit is applied to issue signal of electromagnetic valve driving manually, and releases gas by emergency hold/abort unit.

To adopt exclusive key design to avoid misoperation.

It matches with JB-QBL-QM200 gas extinguishing control panel or JB-QB-QM200/4 gas extinguishing control panel.


Read more detail
CCCF.png
  • The purpose of the QM-AN-01E Emergency Start/Stop Module is to provide an emergency start/stop control for the gas extinguisher and works as an operations and fire alarm. It is mounted at the exit of the fire control site and can be started or stopped by turning a key.


  • When the protected area is on fire, turn the key to FIRING to send an emergency signal to the gas extinguisher,which turns on the solenoid after a preset delay to activate the fire extinguishers. If the fire in this area is put out before the extinguisher activates, turn the key toSTOP to stop the delay period and prevent the extinguisher from needlessly activating.

Technical Parameters:
Working environmentTemperature: -10℃~+55℃
Humidity≤95%(40℃±2℃,dew free)
Working voltageDC 24V
Working current<100mA


If you need any help, please do not hesitate to contact us by Email, we are sure that you will get our response as soon as possible.


Headquarter in Shenzhen


Tel: +86 755 2690 9106


Fax: 86 755 8622 6969


E-mail: sales@fhsjdz.com


Add: 3F, Guangcai Xin Tian Di Building, Nanshan Road, Nanshan District, Shenzhen, 518054, P.R.China


Copyright ©SHENZHEN FANHAI SANJIANG ELECTRONICS CO., LTD. | Legal notice